Rotary speed reducer series
Horizontal open type rotary speed reducer
Release date:2017-11-01 Views:305
Product features:
1.Adopt open base, the tooth surface is easy to maintain and reduce the cost of the whole machine.
2.Using special machine tool equipment to produce ring surface worm, multi-tooth contact, transfer the greater torque, can withstand greater axial force, radial force and tilting moment.
3.The product design USES the domestic and foreign general dimensions, the aspect later replaces.
Range of application:
1.This product is mainly used in the relative rotating parts of engineering machinery field.
2.Aerial vehicle
3.Agricultural machinery
4.Lorry-mounted crane
5.Engineering mechanical chassis rotation.
Application advantages:
1.Through multi-channel process secondary surface electrostatic powder spraying process, using the epoxy zinc-rich epoxy resin powder and flour, greatly improve the ability of corrosion resistance, anti-aging products, more than 1000 hours of salt spray test.
2.Rotary supporting roller and gear tooth surface are treated with quenching, high hardness and strong rigidity.
3.The service life can be up to 25 years.
4.It has self-locking function and improves the use of security.
5.Transmission accuracy can be up to 1 mm (1mrad).
6.The product is developed based on the principle of free maintenance, with minimal maintenance.
7.The load and tilting moment of the product is greater than that of the market.
8. The product is tested with high temperature and low temperature tolerance.
9.Using the national high - tech graphene synthetic grease, its life and heat dissipation efficiency is far more than ordinary grease.
10.The ring surface worm design is adopted, and the multi-tooth contact and the large output torque are loaded.
Performance parameter comparison table.:
specifications | Reduction ratio | The output torque KN.M | Overturning moment KN.M | Keep the moment KN.M | Axial load (static) KN | Axial load KN | Radial load KN | Radial load KN | precision | Since the lock | weight(KG) | efficiency |
5” | 62 | 0.6 | 3.1 | 5 | 45 | 13.8 | 22.6 | 11.8 | 0.15 | Yes | 15 | 40% |
7” | 71 | 1.2 | 13 | 10.6 | 133 | 32 | 53 | 28 | 0.15 | Yes | 16 | 40% |
9” | 61 | 6.5 | 21.3 | 36 | 338 | 81 | 120 | 61 | 0.15 | Yes | 55 | 40% |
12” | 78 | 7.6 | 40.85 | 43.7 | 475 | 108.3 | 180.5 | 95 | 0.15 | Yes | 60 | 40% |
14” | 85 | 8 | 67.6 | 45 | 553 | 133 | 220 | 117 | 0.15 | Yes | 67 | 40% |
17” | 102 | 10 | 97.8 | 65.6 | 970 | 235 | 390 | 205 | 0.15 | Yes | 110 | 40% |
21” | 125 | 15 | 193 | 105 | 1598 | 360 | 669.2 | 320 | 0.15 | Yes | 180 | 40% |
25” | 150 | 17.1 | 268.6 | 150.4 | 1824.7 | 456.2 | 760 | 427.5 | 0.15 | Yes | 193 | 40% |